Description
The Access Point BeaconHD (UAP BeaconHD) is a 802.11ac WiFi access point that utiizes Wave 2 technology and bidirectional uplink design to connect with and relay the signals of other nearby UniFi access points to extend and enhance wireless coverage throughout your home or office. The compact UAP BeaconHD plugs into any AC wall outlet and offers a 1.733 Gbps throughput rate over its 5 GHz (4x4 MU-MIMO) band while also improving the radio rates of nearby WiFi devices. The UAP BeaconHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
UAP-BeaconHD-US Features:
- 802.11ac Wave 2 WiFi technology
- Establishes bidirectional uplinks to nearby UniFi access points
- 5 GHz (802.11ac, 4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- Improves the radio rate of nearby WiFi devices
The Fastest Way to Extend Wi-Fi Coverage and Increase Throughput
High-Capacity Mesh Uplink
Bi-directional uplink to nearby UniFi AP
802.11ac 4x4 MU-MIMO
5 GHz radio rate of up to 1.733 Gbps
Enhance Signal Levels
Improves radio data rates for nearby Wi-Fi devices
Easy to Set Up
Once it's plugged in, the UAP BeaconHD can be adopted and managed with your UniFi Network application.
Seamless Network Integration
The UniFi AP Beacon HD is a meshpoint designed for use with any UniFi AP supporting mesh uplinks, including the UDM.
| UAP-BeaconHD-US Specification | |
|---|---|
| Dimensions | 169.7 x 112.15 x 32.2 mm (6.68 x 4.42 x 1.27") |
| Weight | 260 g (9.17 oz) |
| Networking Interfaces | Wi-Fi |
| Buttons | Reset |
| LED | System Status |
| Processor | 880 MHz MIPS 1004KEc |
| System Memory | 128 MB SDRAM |
| Maximum Power Consumption | 11.5W |
| Supported Voltage Range | 100 - 240VAC, 0.3A Max., 50/60 Hz |
| Power Method | AC |
| Power Supply | AC |
| Power Save | Supported |
| Beamforming | Supported |
| Operating Frequency | 2.4 GHz 5 GHz |
| TX Power* (EIRP) 2.4 GHz 5 GHz |
24.8 dBm 30 dBm |
| Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
| BSSID | Up to 8 per Radio |
| Operating Temperature | -10 to 60° C (14 to 140° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Antenna Gain of 4 Single-Polarity Antennas | |
|---|---|
| (2) Dual-Band | 2.4 GHz — 4.5 dBi 5 GHz — 5 dBi |
| (2) Single-Band | 5 GHz — 5 dBi |
| Advanced Traffic Management | |
|---|---|
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Traffic Isolation | Supported |
| WMM | Voice, Video, Best Effort, and Background |
| Supported Data Rates (Mbps) | |
|---|---|
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n | 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11ac Wave 2 | 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80) 58 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2, VHT 160) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
* Including antenna gain. Maximum TX power level may be limited by user's country-specific regulations.
