null

Ubiquiti PBE-5AC-ISO-Gen2 airMAX PowerBeam AC 5 GHz ISO Gen2 international Version

SKU:
PBE-5AC-ISO-Gen2
$141.00
UPC:
817882023665
Width:
20.00 (in)
Height:
20.00 (in)
Depth:
11.00 (in)
Shipping:
Calculated at Checkout

Description

With tighter beamwidth and a dedicated Wi-Fi radio for management, the airMAX PowerBeam AC 5 GHz ISO Gen2 High Performance Bridge 5-pack bundle from Ubiquiti Networks offers a more reliable long-distance point-to-point connection. This radio is designed to filter out noise to reduce interference in areas congested with multiple RF signals at a maximum data transfer rate of over 450 Mb/s. The dish is built with a rear housing with a metal-plated interior that is designed to further enhance RF shielding, and includes protective radome shields to withstand harsh elements. Setup is simple thanks to fully adjustable hardware designed to make it easy to adjust the mounting bracket ±20° along with the ability to detach the antenna feed with the push of a button.

Key Features

  • Dedicated Wi-Fi Radio for Management
  • 5 GHz Frequency
  • 25 dBi Gain
  • 1 x Gigabit Ethernet Network Interface
  • MIPS 74Kc Processor
  • Power, Ethernet, Signal Strength LEDs
  • Steel & UV Stabilized Plastic Antenna
  • 125 mph Wind Loading / Survivability
  • ±24kV ESD/EMP Protection
  • Includes Pole-Mounting Kit

Improved Noise Immunity

The PowerBeam 5AC ISO Gen2 directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam 5AC Gen2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals at the same or similar frequencies.

Integrated Design

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring a high-performance and innovative mechanical design, the PowerBeam AC Gen2 is versatile and cost-effective to deploy.

Software

Powerful Wireless Features
  • Access Point PtMP airMAX Mixed Mode
  • airMAX ac Protocol Support
  • Long-Range Point-to-Point (PtP) Link Mode
  • Selectable Channel Width
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
  • Automatic Channel Selection
  • Transmit Power Control: Automatic/Manual
  • Automatic Distance Selection (ACK Timing)
  • Strongest WPA2 Security
Usability Enhancements
  • airMagic Channel Selection Tool
  • Redesigned User Interface
  • Dynamic Configuration Changes
  • Instant Input Validation
  • HTML5 Technology
  • Optimization for Mobile Devices
  • Detailed Device Statistics
  • Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView Spectrum Analyzer
Advanced RF Analytics
airMAX ac devices feature a multi-radio architecture to power an RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with advanced RF analytics.

Real-Time Reporting
airOS 8 displays the following RF information:
  • Persistent RF Error Vector Magnitude (EVM) constellation diagrams
  • Signal, Noise, and Interference (SNI) diagrams
  • Carrier to Interference-plus-Noise Ratio (CINR) histograms
Spectral Analysis
airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions:
  • Constantly monitors environmental noise
  • Collects energy data points in real-time spectral views
  • Helps optimize channel selection, network design, and wireless performance
In airView, there are three spectral views, each of which represents different data: waveform, waterfall, and ambient noise level. airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.

UMobile App

Accessing airOS via Wi-Fi
The UMobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). UMobile allows you to set up, configure, and manage the PowerBeam 5AC Gen2. It offers the following options once you're connected or logged in to the device:

  • Check link status information or the basic configuration settings of the PowerBeam 5AC Gen2
  • Change or update the existing configuration of the PowerBeam 5AC Gen2
  • Access tools for initial installation and configuration of the PowerBeam 5AC Gen2
  • Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the PowerBeam 5AC Gen2

Hardware

Full Adjustment Flexibility
The PowerBeam 5AC ISO Gen2 features a two-mount system that provides adjustment flexibility along both axes for versatile mounting options. The mounting system, coupled with the built-in bubble level, enables quick and easy alignment.

Improved Mounting and Surge Protection
Featuring enhanced protection against power surges, the PowerBeam 5AC ISO Gen2 offers a more robust mount with separate azimuth and elevation adjustments.

Enhanced Protection
The rear metal housing has a metal plated interior that is designed to further enhance RF shielding. Additionally, protective radome shields are included to withstand harsh elements.

PRODUCT SPECIFICATIONS

PBE-5AC-Gen2
Dimensions 420 x 420 x 230 mm
(16.54 x 16.54 x 9.06")
Weight 2.22 kg
(4.89 lbs)
Power Supply 24V, 0.5A Gigabit PoE Adapter (Included)
Max. Power Consumption 8.5W
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range 20 to 26VDC
Gain 25 dBi
Networking Interface (1) 10/100/1000 Ethernet Port
Processor Specs MIPS 74Kc
Memory 64 MB
LEDs Power, Ethernet, (4) Signal Strength
Channel Sizes
PtP Mode
PtMP Mode
10/20/30/40/50/60/80 MHz
10/20/30/40 MHz
Enclosure Characteristics
Antenna Feed
Dish Reflector
Outdoor UV Stabilized Plastic
Powder-Coated SPCC
Mounting Pole-Mounting Kit (Included)
Wind Loading 380 N @ 200 km/h (85.4 lbf @ 125 mph)
Wind Survivability 200 km/h (125 mph)
ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 - 95% Condensingtd
RoHS Compliance Yes
Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test IEC 68-2-6
Temperature Shock Test IEC 68-2-14
UV Test IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Certifications CE, FCC, IC
Operating Frequency (MHz)
Worldwide 5150 - 5875
USA
U-NII-1
U-NII-2A
U-NII-2C
U-NII-3
5150 - 5250
5250 - 5350
5470 - 5725
5725 - 5850
Management Radio (MHz)
Worldwide 2412 - 2472
USA 2412 - 2462

Product Includes
• (1) Reflector
• (1) Radome
• (1) Antenna Feed
• (1)Rear Housing
• (1) Mount Bracket
• (1) Adjustment Bracket
• (4) Hex Bolts with Washers
• (2) Pole Clamp
• (4) Carriage Bolts
• (4) Flange Nuts
• (4) Screws with Washers
• (4) Washers
• (4) Nylon Insert Lock Nuts
• (1)Gigabit PoE with Mounting Bracket
• (1) Power Cord
• (1) Quick Start Guide

Product Datasheet:

PBE-5AC-ISO-GEN2

Extra Information

Brand:
Ubiquiti
Width:
20.00 (in)
Height:
20.00 (in)
Depth:
11.00 (in)
Weight:
9.00 LBS