Description
The EP-S16 EdgePoint 16-Port Gigabit PoE-Compliant WISP Switch from Ubiquiti is designed to simplify your hardware by replacing the network cabinet, which usually contains a patch panel, power rack, multiple PoE adapters, switch, router, modem, and more. It is encased in a die-cast aluminum alloy and polycarbonate shell with UV resistance, and features a combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support. With the EP-S16, you'll have access to a total of sixteen ports: two input or output ports with 54V or 24V / 1.4A passive PoE, two output ports with 54V or 24V / 1.4A passive PoE, and twelve PoE+ or 24V / 0.7A passive PoE output ports. Furthermore, use the EdgePoint software, accessible via a network port and a web browser, to monitor and manage your network.
Key Features
- 16 x 10/100/1000 RJ45 Ports
- 2 x 1/10 Gbps SFP+ Ports
- 54V or 24V /1.4A Passive PoE
- ARM Cortex-A9 400 MHz Processor
- 256MB of DDR3 RAM
- Die-cast Aluminum Alloy and Polycarbonate
- Fiber Backhaul Capability
- Speed, Link, Activity, and PoE LEDs
- Wall and Pole Mountable
FiberProtect
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and to consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
WISP Control
Designed as a WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.
All-in-One Design
A single compact controller eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
Advanced Routing Applications
Powerful routing features such as link balancing provide redundancy and increased performance for outdoor wireless links.
Versatile Power Options
Powered by 54VDC or by PoE, the EP-S16 can support 54 or 24V passive PoE to power all Ubiquiti products, including airFiber and airMAX.
Intuitive User Interface
The EdgePoint features a graphical user interface designed for convenient setup and control. Accessed via a network port and web browser, the user-friendly interface provides intuitive management with a virtual view of the ports, displaying physical connectivity, speed, and status.
Routing Configuration
The EP-R6 offers robust features, including:
- VLAN interfaces for network segmentation
- Static routes and support of routing protocols: OSPF, RIP, and BGP
- Firewall policies and NAT rules
- Application identification with Deep Packet Inspection (DPI)
- DHCP services
- Quality of Service (QoS)
- Network administration and monitoring tools
- Administrator and operator accounts
- Comprehensive IPv6 support
Command-Line Interface (CLI) Configuration
The CLI provides quick and flexible configuration by command line and features the following:
- For power users, configuration and monitoring of all advanced features
- Direct access to standard Linux tools and shell commands
- CLI access through the following
- SSH
- Telnet
- Graphical user interface
Breakthrough in Tower Deployment
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
Purpose-Built for WISP Control
The first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX® with fiber backhaul and versatile powering capabilities.
All-in-One Design
A single, compact controller eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
Advanced Routing Applications
Powerful routing features – such as link balancing – provide redundancy and increased performance for outdoor wireless links.
PRODUCT SPECIFICATIONS
| EP-S16 | |
|---|---|
| Dimensions With Wall-Mount |
326.6 x 382.7 x 88.8 mm (12.86 x 15.07 x 3.50") 326.6 x 382.7 x 105.5 mm (12.86 x 15.07 x 4.15") |
| Weight With Wall-Mount |
3.4 kg (7.50 lb) 3.8 kg (8.38 lb) |
| Max. Power Consumption | 40W (Excludes PoE Output) |
| Power Input | (1) DC Terminal Block or (2) RJ45 (Ports 1 and 2) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs) |
| Power Supply | Min. 54V / 0.8A (Excludes PoE Output Power) |
| VDC Input | 54V / 6A |
| Passive PoE Input | (2) 54V / 1.5A, 4-Pair (+1, 2, 4, 5; - 3, 6, 7, 8) Passive PoE, Ports 1 and 2 (Do NOT Configure Port 1 or 2 in PoE Output Mode if You Are Using PoE Input Power Sources.) |
| Passive PoE Output | (4) 54V or 24V /1.4A, 4-Pair (+1, 2, 4, 5; - 3, 6, 7, 8) Passive PoE, Ports 1 to 4 (12) 802.3af/at or 24V/0.7A, 2-Pair (+ 4, 5; - 7, 8) Passive PoE, Ports 5 to 16 |
| Power Monitoring | (1) DC Terminal Block, Input Power (2) RJ45, Ports 1 and 2, PoE Input or Output Power (14) RJ45, Ports 3 to 16, PoE Output Power |
| Supported Voltage Range | +42 to +56VDC (-48V is NOT Supported) |
| Button | Reset |
| LEDs System PoE In 1 to 16 SFP |
Power PoE Speed/Link/Activity, PoE Speed/Link/Activity |
| Ports Serial Console Port Data Ports |
(1) RJ45 Serial Port (16) 10/100/1000 RJ45 Ports (2) 1/10 Gbps SFP+ Ports |
| Pole/Wall Mount | Yes |
| Operating Temperature | -40 to 65° C (-40 to 149° F) |
| Operating Humidity | 10 - 90% Noncondensing |
| Certifications | CE, FCC, IC |
Model Comparison
 EP-R6
|
 EP-R8
|
 EP-S16
| |
|---|---|---|---|
| Function | Router | Router | Switch |
| Gigabit RJ45 Ports | 5 | 6+2* | 16 |
| SFP Ports | 1 | 2* | N/A |
| SFP+ Ports | N/A | N/A | 2 |
| Power Input | (1) DC Terminal Block or (1) 24V, 4-Pair |
(1) DC Terminal Block or (2) 54V, 4-Pair |
(1) DC Terminal Block or (2) 54V, 4-Pair |
| PoE Output | (5) 24V, 2-Pair | (2) 54/24V, 4-Pair (5) 24V, 2-Pair |
(4) 54/24V, 4-Pair (12) 802.3af/at or 24V, 2-Pair |
Extra Information
Brand:
Ubiquiti
Width:
12.86
(in)
Height:
15.07
(in)
Depth:
4.15
(in)
Weight:
8.00 LBS
