null

Tycon Systems 9-36VDC IN, 24V 24W Gigabit Passive 4pair PoE OUT. DC to DC Converter and PoE Injector

SKU:
TP-DCDC-1224G-4P
$94.95
UPC:
810017121373
Width:
4.90 (in)
Height:
1.50 (in)
Depth:
3.00 (in)
Shipping:
Calculated at Checkout

Description

9-36VDC IN, 24V 24W Gigabit Passive 4pair PoE OUT. DC to DC Converter and PoE Injector, PoE Pins 1245(+), 3678(-)

The TP-DCDC-1224G-4P Gigabit DC to DC converters offered by Tycon Power Systems are a low cost and high efficiency solution for those requiring 24VDC 4 pair Passive Power over Ethernet from a 12VDC or 24VDC voltage source like a battery system or vehicle. They have an integrated 4 pair PoE injector to apply the power and data output to the CAT5 Ethernet cable. All 8 wires carry both data and PoE power. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. Input and outputs are isolated so + or – ground is OK.

They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and 4 pairt PoE power on the shielded RJ45 output jack. They work by supplying power on Ethernet pins 1,2,4,5(V+) and 3,6,7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 24W.

TP-DCDC-1224G-4P Features

  • Input Voltage 9-36VDC
  • 24V Gigabit Passive 4 Pair PoE Output
  • Dual Inputs for Connecting 2 Power Sources
  • Integrated 10/100/1000MB PoE Inserter
  • High Power up to 24W
  • Short Circuit, Over Current and Reverse/Over Voltage Protect
  • High Temperature Operation to 70C
  • Built-in Low Battery Disconnect and Surge Protection
  • I.T.E. Power Supply, UL Listed

Applications

  • 12V / 24V Battery Systems, Vehicle Applications
  • UBNT Airfiber-X
  • Wireless Access Points and Client Devices
TP-DCDC-1224G-4P Specifications
DC Input Voltage 9VDC – 36VDC, Input/Output is Isolated
DC Input Connector Removeable Screw Type Compression Wire Terminal (12 AWG Max)
DC Output Voltage (+/-2.5%) 24V (Passive) 4 pair power
Data in & Data/POE Output Connector RJ45 (Shielded)
Output Current (max) 1A
Output Power (max) 24W
Low Voltage Disconnect / Reconnect Disconnect at 8.9V, Reconnect at 9.02V
Efficiency (min) 80%
Line Regulation 1%
Load Regulation 5%
Ripple 1%
Noise 1%
LED Operation RED = Input Power On, GREEN = Output Connected
Surge Protection (IEC 61000-4) 15kV (Air), 8kV (Contact), 20A (8/20us) Lightning
EMC Standards FCC Class B EN55022 Class B
Safety Standards CSA 22.2 &TUV EN60950
Operating Temperature -40 to +70°C (-40 to +158°F)
Operating Humidity (RH) 5% - 90%
Storage Temperature -40 to +80°C (-40 to +176°F)
Dimensions (LxWxH) 125 x 75 x 38mm (4.9 x 3 x 1.5”)
Weight 300g (10.6oz)
Warranty 3 Years

Extra Information

Brand:
Tycon Systems
Width:
4.90 (in)
Height:
1.50 (in)
Depth:
3.00 (in)
Weight:
1.00 LBS