Description
The Mimosa C5c is a flexible connectorized client radio solution for accommodating short and long range PTP and PTMP, as well as custom antenna solutions. Incorporating unique support for Mimosa’s SRS technology, the C5c enables the fastest speeds and is the most scalable wireless access solution available today. The C5c is ideal for professionally-installed rural Fixed Wireless and long range applications for point-to-point backhaul links.
Flexible Antenna Options
Connect to virtually any dual polarization antenna to custom engineer longer distance client links. The C5c has dual RP-SMA connectors for easy cabled antenna connectivity. It can be mounted to any pole via hose clamps or easily clipped onto antennas supporting compatible clip-on mounting bracket systems.
PTP Backhaul Links
The C5c provides extreme price/performance for PTP backhaul links in a small form factor. Wide frequency range support allows avoidance of crowded 5 GHz spectrum bands. Where regulations allow, long distances are enabled with high system power and flexible antenna options.
SRS Client
The C5c offers client-side support for Mimosa’s proprietary Spectrum Reuse Synchronization (SRS) technology. This ensures each client device precisely receives and transmits under the timing control of the access point and can dynamically request upstream bandwidth. As opposed to alternative (fixed) timeslot protocols, upstream bandwidth and latencies are allocated on demand which enables significantly higher overall upstream network bandwidth utilization.
Multi-User MIMO
A key component to scaling networks efficiently is leveraging innovative new Multi-User capabilities. With MU-MIMO, multiple clients on the same access point are coordinated by the access point to simultaneously share spectrum ``spatially'' via unique antenna beamforming. Each client device shares spatial geographic information with its associated Mimosa A5 device to allow coordination of the shared spectrum. This radically improves multipoint access scaling and spectral efficiency.
APPLICATIONS
*Distances vary based on Mimosa C5c and the access point power and antenna gain. Please refer to the Mimosa Design Tools to simulate performance with your regional wireless regulatory restrictions.
FLEXIBLE ANTENNA OPTIONS
Connect to virtually any dual polarization antenna to custom-engineer longer distance client links. The C5c supports 2x2:2 MIMO dual connector RP-SMA for easy cabled antenna connectivity and can be mounted to any pole via hose clamps, or easily clipped onto antenna supporting compatible clip-on mounting bracket systems.
SPECTRUM REUSE SYNCHRONIZATION (SRS) CLIENT
In SRS mode, all uplink and downlink transmissions are scheduled by the Access Point (A5-14/A5c), which greatly improves medium access protocol (MAC) efficiency, allows interference coordination, and reduces jitter. In contrast, in WiFi-Interop mode, clients need to contend with each other to access the channel, which leads to reduced MAC efficiency, higher interference levels, and higher jitter.
![C5C Client Sync@2X](https://mimosa.co/uploads/_376xAUTO_stretch_center-center/c5c_client_sync@2x.png)
MULTI-USER MIMO*
A key component to scaling network capacity is leveraging innovative new multi-user MIMO capabilities. With MU-MIMO, multiple clients on the same access point are coordinated to simultaneously share spectrum "spatially" via unique antenna beamforming. All the client devices provide their spatial information to their associated A5/A5c device to facilitate coordination of the shared spectrum. This radically improves multipoint access capacity and spectral efficiency and reduces latency.
* Available in a future release
![C5C Multiuser@2X](https://mimosa.co/uploads/_519xAUTO_stretch_center-center/C5c_multiuser@2x.png)
Product Specifications
Performance | |
Max Throughput | PTP/PTMP: 700 Mbps IP (866 Mbps PHY) |
Wireless Protocols | WiFi Interop Mimosa SRS |
Modes | PTMP Client PTP Backhaul |
Radio | |
MIMO & Modulation | 2x2:2 MIMO OFDM up to 256 QAM |
Bandwidth* | 20/40/80 MHz channels tunable to 5 MHz increments for Mimosa SRS; Tunable to standard WiFi channels for WiFi Interop |
Frequency Range | PTMP: 4900-6400 MHz*** PTP: 4900-6400 MHz Restricted by country of operation *new* US/FCC 5600-5650 MHz support FCC DFS (U-NII-2a, U-NII-2c) availability pending certification |
Max Output Power | 27 dBm |
Sensitivity ( MCS 0 ) | -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz |
Power | |
Max Power Consumption | 9.2 W |
System Power Method | Passive PoE (24-56 VDC) |
PoE Power Supply | Passive POE compliant, 48-56 V Power over Ethernet supply (Not Included) |
Physical | |
Dimensions | Depth 44 mm (1.73") Width 65 mm (2.56") Height 188.4 mm (7.42") |
Weight | 295 grams (10.4 oz) |
Mounting | Single pole strap |
Connector Type | RP-SMA (x2) |
Environmental | |
Outdoor Ingress Protection Rating | IP55 |
Operating Temperature | -40°C to +55°C (-40°F to 131°F) |
Operating Humidity | 5 to 100% condensing |
Operating Altitude | 4420 m (14501') maximum |
Shock & Vibration | ETS 300-019-2-4 class 4M5 |
Features | |
Gigabit Ethernet | 10/100/1000-BASE-T |
Management Services | Mimosa cloud monitoring and management, SNMPv2 & Syslog legacy monitoring, HTTPS, HTML 5 based Web UI |
Smart Spectrum Management | Active scan monitors/logs ongoing RF interference across channels (no service impact) Dynamic auto-optimization of channel and bandwidth use |
Security | WPA2 + Mimosa 802.1x Client** |
QoS | Supports 4 pre-configured QoS levels |
Regulatory + Compliance | |
Approvals | FCC Part 15.407 and Part 90Y, IC RSS210, CE, ETSI 301 893/302 502 |
Other National Regulations | |
RoHS Compliance | Yes |
Safety | UL/EC/EN/ 60950-1 + CSA-22.2 |