PWR-LINE AP (US plug)802.11b/g/n WiFi AP with a single Ethernet port and capability to connect to other PWR-LINE devices through the electrical lines in your premises (Type A plug, US plug)
The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach. Unit comes with Type A power plug (commonly used in USA, Canada, Mexico & Thailand)
Especially useful in homes with thick walls, where you can extend Wi-Fi coverage to those rooms, where signal is poor, without having to re-wire your house.
Simply plug this device directly into one of the LAN ports of your MikroTik router, and add another one somewhere further in your premises. They will link together through the power lines. You can install up to eight PWR-LINE devices to further build your network.
Datasheet
PL6411-2nD Specifications |
Product code |
PL6411-2nD |
Architecture |
MIPSBE |
CPU |
QCA9533 |
CPU core count |
1 |
CPU nominal frequency |
650 MHz |
PLC chipset |
QCA6410 |
Dimensions |
50 x 68 x 33mm |
RouterOS license |
4 |
Operating System |
RouterOS |
Size of RAM |
64 MB |
Storage size |
16 MB |
Storage type |
FLASH |
MTBF |
Approximately 100'000 hours at 25C |
Tested ambient temperature |
-20°C to 60°C |
Suggested price |
$42.00 |
Powering Details |
AC input range |
100-240 |
Frequency (Hz) |
50-60 |
Max power consumption |
6.3 W |
Wireless Specifications |
Wireless 2.4 GHz Max data rate |
300 Mbit/s |
Wireless 2.4 GHz number of chains |
2 |
Wireless 2.4 GHz standards |
802.11b/g/n |
Antenna gain dBi for 2.4 GHz |
1.5 |
Wireless 2.4 GHz chip model |
QCA9533 |
Wireless 2.4 GHz generation |
Wi-Fi 4 |
Ethernet Details |
10/100 Ethernet ports |
1 |
Certification & Approvals |
Certification |
CE, FCC, IC, EAC, ROHS |
IP |
IP00 |
Wireless specifications
2.4 GHz | Transmit (dBm) | Receive Sensitivity |
1MBit/s |
22 |
-96 |
11MBit/s |
22 |
-89 |
6MBit/s |
20 |
-93 |
54MBit/s |
18 |
-74 |
MCS0 |
20 |
-93 |
MCS7 |
16 |
-71 |